Wearing iced out chain, necklace, and diamond bracelet is all about the style of an individual. Even the versatile chain may become fashionable as far as they are put on in moderation. Those looking for the Cuban link chain are about to make the right decision since numerous of them are in the market for customers. These chains are available in considerable numbers due to different likes and dislike from the wears. Cuban is a good experience in the production and selling of chains for years. There is a lot of skills applied when making the 24karat gold Cuban link chain by the goldsmith. It’s not an easy process, thus calling for consistency and openness to continue expanding the wisdom related to make the chains that are competitive in the market. They require extensive working on them and many skilled craftsmen whose work is to make chains. Most of the chains in past years were made by use of hands.
The goldsmith does a lot of work to develop an attractive chain that gets into the world market. The process is so extensive, involving the crushing of gold where a good percentage of it falls, but it is not wasted but used to make other substances or fill up. The gold, to be marketable, has to meet the projected specification in terms of quantity and weight. It’s key for the buyers to know the actual process the gold goes through before mixing it with other metals to make a chain. Understanding how a goldsmith creates a 24k gold cuban link chain is so vital to every user and every reader since they will treat the item with good honor. This article focuses on analyzing some of the processes involved in making a gold chain.
1.Mix the gold with other metals
The way the gold takes is through the karat – scale. “Karat” refers to gold means a unit of purity present in the real gold, especially out of 24. Pure gold is referred to as 24karat because, from the total 24 parts, 24 of them are gold. Therefore, when making a gold weak or a Cuban link chain, it’s not practical to use 24karat gold since it is too soft and gets strengthened easily and destruction over time, even when in regular wear. That is why adding other metals like alloys makes the gold stronger and increases its longevity. Gold differs in different countries, but the most common is 24karat gold and its use in Cuban and United States. After mixing the gold with other metals, it melted and then molded into various shapes depending on the item the goldsmith wants to make. This first process answers to questions of many readers who ask if there is a need of maxing the gold with other metals.
2. Melt and pour the gold
After combining the required amount of 24 karat gold with the right metals, melt the mixture using a propane torch. The goldsmith then pours the molten gold on the cast iron. The molds’ sizes are normally in a standard form, so right to use by the dimensions of chain required. The resulting bars from the process make the links into chains, with the first bar transformed to a wire. It out of the experience and development of proper skills that one knows how a goldsmith creates a 24karat gold Cuban link chain in the melting of the gold. The melting should be in the right heat to avoid damaging the gold.
3. Stretching of a gold wire
the gold bar made in the above step requires stretching and compression with the use of different automatic rolling mills up to the stage when it will get a wire shape to make the links of the chain. This process is time-consuming and requires many passes through the rolling mills to properly stretch the wire in the required length. The rolling mills are used to round the wire’s edges in a square shape and fed into various holes to increase the rounding process.
4. Roll and cut the links
The gold wire is made to form a metal bar that depends on the gold chain’s size, but the process continues until the goldsmiths get the appropriate diameter to form a coil. Besides, since the process is manual, it requires the strength input from two goldsmiths because of the many muscle stretches involved. A unique saw cuts the coil straight, separating it from the individual links and then cleaning with red. To make thick chains, one requires a thick wire which is harder to bend. The heating process continues in mixing the gold with the alloy, especially when heating the coil with a torch.
5. Soldering and twisting the chain
Because every link is closely attached, it soldered the gold at the cut point by using a gold solder. After soldering every link of the chain together, attach the chain into an industrial machine for twisting, which twists a single end of the chain while the other is securely held. The purpose of this process is to arrange the links in the same manner. The chain is aneled using a torch on twice occasions to assist in twisting the links quickly. After that, it is cleaned using the ultrasound solution.
6. Fill the links flat
After the end of the above process, the gold you get is much heavier than the projected weight since the links are round in shape. To remove the extra weight, it goes through the filling process, creating a flat design and more so a design known by the Cuban link chain. The chain is first fixed on the wooden board before the filing process begins. After that, an involving labor process for filling starts. Here, the goldsmith must be careful since these are the last stages of making the 24karat gold Cuban link chain. Furthermore, to ensure proper work performance, both sides of the chain should be fived on the board, and filling occurs equally.
7. Polishing the chain and finding the final weight
The last part of creating a Cuban kink chain starts with polishing the chain. After completing this procedure, one of the ends is cut, leaving the slice open to get attached to the opposite side of the chain. Attach the chain’s ends and then cut them, then polish the entire chain before submerging it into the electroplating solution. It’s good to note that most of the clients who buy the Cuban chains like the ones which are electroplated into 10K to 14K. some others love it when it is electroplated between 18k or even higher. Therefore, the electroplating depending completely on ten requests of the clients. After that, the gold chain is weighed on a certified scale to know its approximate weight in grams.
In summary, the above process is key in understanding how a goldsmith creates a 24karat gold Cuban link chain. After every ready follows it, they will get the best knowledge on how the gold is made. The process is quite involving, and it requires qualified personnel’s so as they don’t waste the gold-making products which have no market value. There is a lot of competition in the market; therefore, to remain on the top, there is a need to produce a unique gold chain that the customers will love.